Power-integrated, wireless neural recording systems on the cranium using a direct printing method for deep-brain analysis.

Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject's natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi-solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.

Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications.

Rechargeable batteries, typically represented by lithium-ion batteries, have taken a huge leap in energy density over the last two decades. However, they still face material/chemical challenges in ensuring safety and long service life at temperatures beyond the optimum range, primarily due to the chemical/electrochemical instabilities of conventional liquid electrolytes against aggressive electrode reactions and temperature variation. In this regard, a gel polymer electrolyte (GPE) with its liquid components immobilized and stabilized by a solid matrix, capable of retaining almost all the advantageous natures of the liquid electrolytes and circumventing the interfacial issues that exist in the all-solid-state electrolytes, is of great significance to realize rechargeable batteries with extended working temperature range. We begin this review with the main challenges faced in the development of GPEs, based on extensive literature research and our practical experience. Then, a significant section is dedicated to the requirements and design principles of GPEs for wide-temperature applications, with special attention paid to the feasibility, cost, and environmental impact. Next, the research progress of GPEs is thoroughly reviewed according to the strategies applied. In the end, we outline some prospects of GPEs related to innovations in material sciences, advanced characterizations, artificial intelligence, and environmental impact analysis, hoping to spark new research activities that ultimately bring us a step closer to realizing wide-temperature rechargeable batteries.

Porous Polyethylene Supports in Reinforcement of Multiblock Hydrocarbon Ionomers for Proton Exchange Membranes.

Hydrocarbon (HC)-based block copolymers have been recognized as promising candidates for proton exchange membranes (PEMs) due to their distinct hydrophilic-hydrophobic separation, which results in improved proton transport compared to that of random copolymers. However, most PEMs derived from HC-based ionomers, including block copolymers, encounter challenges related to durability in electrochemical cells due to their low mechanical and chemical properties. One method for reinforcing HC-based ionomers involves incorporating the ionomers into commercially available low surface tension PTFE porous substrates. Nevertheless, the high interfacial energy between the hydrocarbon-based ionomer solution and PTFE remains a challenge in this reinforcement process, which necessitates the application of surface energy treatment to PTFE. Here, multiblock sulfonated poly(arylene ether sulfone) (SPAES) ionomers are being reinforced using untreated PE on the surface, and this is compared to reinforcement using surface-treated porous PTFE. The PE support layer exhibits a lower surface energy barrier compared to the surface-treated PTFE layer for the infiltration of the multiblock SPAES solution. This is characterized by the absence of noticeable voids, high translucency, gas impermeability, and a physical and chemical stability. By utilizing a high surface tension PE support with a comparable value to the multiblock SPAES, effective reinforcement of the multiblock SPAES ionomers is achieved for a PEM, which is potentially applicable to various hydrogen energy-based electrochemical cells.

Regulating electrostatic phenomena by cationic polymer binder for scalable high-areal-capacity Li battery electrodes.

Despite the enormous interest in high-areal-capacity Li battery electrodes, their structural instability and nonuniform charge transfer have plagued practical application. Herein, we present a cationic semi-interpenetrating polymer network (c-IPN) binder strategy, with a focus on the regulation of electrostatic phenomena in electrodes. Compared to conventional neutral linear binders, the c-IPN suppresses solvent-drying-induced crack evolution of electrodes and improves the dispersion state of electrode components owing to its surface charge-driven electrostatic repulsion and mechanical toughness. The c-IPN immobilizes anions of liquid electrolytes inside the electrodes via electrostatic attraction, thereby facilitating Li+ conduction and forming stable cathode-electrolyte interphases. Consequently, the c-IPN enables high-areal-capacity (up to 20 mAh cm-2) cathodes with decent cyclability (capacity retention after 100 cycles = 82%) using commercial slurry-cast electrode fabrication, while fully utilizing the theoretical specific capacity of LiNi0.8Co0.1Mn0.1O2. Further, coupling of the c-IPN cathodes with Li-metal anodes yields double-stacked pouch-type cells with high energy content at 25 °C (376 Wh kgcell-1/1043 Wh Lcell-1, estimated including packaging substances), demonstrating practical viability of the c-IPN binder for scalable high-areal-capacity electrodes.

CT Scan Differences of Pulmonary TB According to Presence of Pleural Effusion.

BACKGROUND: Subpleural micronodules and interlobular septal thickening are common CT scan findings in TB pleural effusion. These CT scan features could help us differentiate between TB pleural effusion and nonTB empyema. RESEARCH QUESTION: Does the frequency of subpleural micronodules and interlobular septal thickening correlate with the presence of pleural effusion in patients with pulmonary TB? STUDY DESIGN AND METHODS: CT scan findings of pulmonary TB, micronodules and their distribution (peribronchovascular, septal, subpleural, centrilobular, and random), large opacity (consolidation/macronodule), cavitation, tree-in-buds, bronchovascular bundle thickening, interlobular septal thickening, lymphadenopathy, and pleural effusion were retrospectively analyzed. Patients were divided into two groups according to the presence of pleural effusion. Clinicoradiologic findings of the two groups were then analyzed. We presented Benjamini-Hochberg critical value for multiple testing correction of CT scan findings, with a false discovery rate of 0.05. RESULTS: Of a total of 338 consecutive patients diagnosed with pulmonary TB who underwent CT scans, 60 were excluded because of coexisting pulmonary diseases. The frequency of subpleural nodules (47/68, 69% in pulmonary TB with pleural effusion vs 30/210, 14% in pulmonary TB without effusion, P < .001, Benjamini-Hochberg [B-H] critical value = 0.0036) and interlobular septal thickening (55/68, 81% vs 134/210, 64%, P = .009, B-H critical value = 0.0107) was significantly higher in the group of patients with pulmonary TB with pleural effusion than in the group without pleural effusion. In contrast, tree-in-buds (20/68, 29% vs 101/210, 48%, P = .007, B-H critical value = 0.0071) were less frequently seen in patients with pulmonary TB with pleural effusion. INTERPRETATION: Subpleural nodules and septal thickening were more common in pulmonary TB patients with pleural effusion than in those without pleural effusion. TB involvement of the lymphatics in the peripheral interstitium could be associated with the development of pleural effusion.

The Effect of Diabetes Control Status on CT Findings in Pulmonary Tuberculosis: Emphasis on Bronchial Erosive Changes.

PURPOSE: Studies on the effect of diabetes mellitus (DM) on the radiologic findings of pulmonary tuberculosis (PTB) have reported inconsistent results. These findings may have been influenced by the glycemic control status of the patients studied. To our knowledge, no recent data have described the effect of the DM control status on CT findings in PTB in terms of medium-sized airway involvement that is visualized as bronchial erosion on CT. The aim of this present study was to determine whether the DM control status influenced radiological manifestations in patients with PTB, with an emphasis on bronchial erosive changes. METHODS: We conducted a retrospective single-center study on patients who were newly diagnosed with PTB. A total of 426 consecutive patients with PTB who underwent CT scans at the time of diagnosis from 1 January 2017 to 31 March 2020 were included in this study. The included patients were categorized as having no DM (non-DM), controlled DM, or uncontrolled DM. The patient medical charts, microbiology study results, and pulmonary changes on the CT scans were analyzed. RESULTS: Among 426 patients with PTB who underwent CT scans at the time of diagnosis, 91 were excluded either due to undetermined hemoglobin A1C (HbA1C) levels (n = 25) or concomitant pulmonary diseases (n = 66) that would make the analysis of the pulmonary changes on CT scans difficult. Finally, 335 patients were included in this study (224 men and 111 women; mean age, 59 years; range, 16-95 years). Among the 335 patients, 82 (24.5%) had DM and 52 of those (63.4%) had an uncontrolled status. The frequency of cavitation (43% vs. 23% vs. 79%, p < 0.001) and bronchial erosion (44% vs. 30% vs. 73%, p < 0.001) was significantly different between the three groups. The uncontrolled DM group showed a high frequency of cavitation and bronchial erosion compared to the non-DM (cavitation, p < 0.001 and bronchial erosion, p < 0.001) and controlled DM groups (p < 0.001 and p < 0.001). However, the frequency of cavitation and bronchial erosion in the controlled DM group was not different compared to the non-DM group. CONCLUSION: The glycemic status (HbA1C ≥ 7.0), not the presence of DM, influenced the radiologic manifestations of PTB, especially in terms of medium-sized bronchial involvement, appearing as bronchial erosive changes and the feeding bronchus sign on chest CT scans. This difference in the uncontrolled DM group was likely to contribute to the higher frequency of cavitation.

Elucidating Ion Transport Phenomena in Sulfide/Polymer Composite Electrolytes for Practical Solid-State Batteries.

Despite the enormous interest in inorganic/polymer composite solid-state electrolytes (CSEs) for solid-state batteries (SSBs), the underlying ion transport phenomena in CSEs have not yet been elucidated. Here, we address this issue by formulating a mechanistic understanding of bi-percolating ion channels formation and ion conduction across inorganic-polymer electrolyte interfaces in CSEs. A model CSE is composed of argyrodite-type Li6PS5Cl (LPSCl) and gel polymer electrolyte (GPE, including Li+-glyme complex as an ion-conducting medium). The percolation threshold of the LPSCl phase in the CSE strongly depends on the elasticity of the GPE phase. Additionally, manipulating the solvation/desolvation behavior of the Li+-glyme complex in the GPE facilitates ion conduction across the LPSCl-GPE interface. The resulting scalable CSE (area = 8 × 6 (cm × cm), thickness ~ 40 µm) can be assembled with a high-mass-loading LiNi0.7Co0.15Mn0.15O2 cathode (areal-mass-loading = 39 mg cm-2) and a graphite anode (negative (N)/positive (P) capacity ratio = 1.1) in order to fabricate an SSB full cell with bi-cell configuration. Under this constrained cell condition, the SSB full cell exhibits high volumetric energy density (480 Wh Lcell-1) and stable cyclability at 25 °C, far exceeding the values reported by previous CSE-based SSBs.

Olefin-Linked Covalent Organic Frameworks with Electronegative Channels as Cationic Highways for Sustainable Lithium Metal Battery Anodes.

Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78 mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700 h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.

Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication.

The current lithium-ion battery (LIB) electrode fabrication process relies heavily on the wet coating process, which uses the environmentally harmful and toxic N-methyl-2-pyrrolidone (NMP) solvent. In addition to being unsustainable, the use of this expensive organic solvent substantially increases the cost of battery production, as it needs to be dried and recycled throughout the manufacturing process. Herein, we report an industrially viable and sustainable dry press-coating process that uses the combination of multiwalled carbon nanotubes (MWNTs) and polyvinylidene fluoride (PVDF) as a dry powder composite and etched Al foil as a current collector. Notably, the mechanical strength and performance of the fabricated LiNi0.7Co0.1Mn0.2O2 (NCM712) dry press-coated electrodes (DPCEs) far exceed those of conventional slurry-coated electrodes (SCEs) and give rise to high loading (100 mg cm-2, 17.6 mAh cm-2) with impressive specific energy and volumetric energy density of 360 Wh kg-1 and 701 Wh L-1, respectively.

Comparison of Bone Agesin Early Puberty: Computerized Greulich-Pyle Based Bone Age vs. Sauvegrain Method.

Purpose: To compare the computerized Greulich-Pyle based bone age with elbow bone age. Materials and Methods: A total of 2126 patients (1525 girls; 601 boys) whose elbow bone age was within the evaluable range by the Sauvegrain method, and who simultaneously underwent hand radiography, were enrolled in the study. The 1st-bone age and VUNO score of the hand were evaluated using VUNOMed-BoneAge software. The correlation between the hand and elbow bone age was analyzed according to the child's gender and the probability of 1st-bone age. Results: The correlation between VUNO score and elbow bone age (r = 0.898) was higher than the correlation between 1st-bone age and elbow bone age (r = 0.879). Moreover, the VUNO score showed a better correlation with the elbow bone age in patients with a 1st-bone age probability of less than 70%, or in girls. Elbow bone age was more advanced compared to hand bone age, and this difference increased until the middle of puberty and gradually decreased in the latter half. Conclusion: The computerized Greulich-Pyle based hand bone age showed a significant correlation with the elbow bone age at puberty. However, since the elbow bone age tends to advance faster than the hand bone age, caution is required while judging the bone age during puberty.

The Atypical Manifestation of Pulmonary Tuberculosis in Patients with Bronchial Anthracofibrosis.

It has been stated that bronchial anthracofibrosis (BAF) has an important relationship with pulmonary tuberculosis (TB), and the coexistence of TB and BAF is high. The purpose of this study was to compare the differences in computed tomography (CT) characteristics of pulmonary TB according to the presence of underlying BAF. Total of 202 consecutive patients who were diagnosed with pulmonary TB and underwent bronchoscopy and CT in our institution were retrospectively reviewed. We classified the patients into two groups according to the presence of BAF and compared the clinicoradiological findings between the two groups (anthracofibrosis group vs. nonanthracofibrosis group). Elderly and female patients were significantly higher in anthracofibrosis group (mean age 79 ± 7 (64−94) vs. 56 ± 17 (16−95), p < 0.001; female 89% vs. 29%, p < 0.001). The frequency of internal low-density area or focal contour bulge within atelectasis (64% vs. 1%, p < 0.001), lower lobe predominance (43% vs. 9%, p < 0.001), endobronchial involvement (46% vs. 15%, p < 0.001), and lymphadenopathy (57% vs. 28%, p = 0.002) were significantly higher in anthracofibrosis group. In contrast, the anthracofibrosis group showed lower frequency of upper lobe predominance (32% vs. 81%, p < 0.001) and cavitation (14% vs. 51%, p = 0.001). In conclusion, being aware of these atypical manifestations of pulmonary TB in the presence of BAF will be of great help in early detection of TB.

Transparent and Multi-Foldable Nanocellulose Paper Microsupercapacitors.

Despite the ever-increasing demand for transparent power sources in wireless optoelectronics, most of them have still relied on synthetic chemicals, thus limiting their versatile applications. Here, a class of transparent nanocellulose paper microsupercapacitors (TNP-MSCs) as a beyond-synthetic-material strategy is demonstrated. Onto semi-interpenetrating polymer network-structured, thiol-modified transparent nanocellulose paper, a thin layer of silver nanowire and a conducting polymer (chosen as a pseudocapacitive electrode material) are consecutively introduced through microscale-patterned masks (which are fabricated by electrohydrodynamic jet printing) to produce a transparent conductive electrode (TNP-TCE) with planar interdigitated structure. This TNP-TCE, in combination with solid-state gel electrolytes, enables on-demand (in-series/in-parallel) cell configurations in a single body of TNP-MSC. Driven by this structural uniqueness and scalable microfabrication, the TNP-MSC exhibits improvements in optical transparency (T = 85%), areal capacitance (0.24 mF cm-2 ), controllable voltage (7.2 V per cell), and mechanical flexibility (origami airplane), which exceed those of previously reported transparent MSCs based on synthetic chemicals.

Ion slippage through Li+-centered G-quadruplex.

Single-ion conductors have garnered attention in energy storage systems as a promising alternative to currently widespread electrolytes that allow migration of cations and anions. However, ion transport phenomena of most single-ion conductors are affected by strong ion (e.g., Li+)-ion (immobilized anionic domains) interactions and tortuous paths, which pose an obstacle to achieving performance breakthroughs. Here, we present a Li+-centered G-quadruplex (LiGQ) as a class of single-ion conductor based on directional Li+ slippage at the microscopic level. A guanine derivative with liquid crystalline moieties is self-assembled to form a hexagonal ordered columnar structure in the LiGQ, thereby yielding one-dimensional central channels that provide weak ion-dipole interaction and straightforward ionic pathways. The LiGQ exhibits weak Li+ binding energy and low activation energy for ion conduction, verifying its viability as a new electrolyte design.

Redox-homogeneous, gel electrolyte-embedded high-mass-loading cathodes for high-energy lithium metal batteries.

Lithium metal batteries have higher theoretical energy than their Li-ion counterparts, where graphite is used at the anode. However, one of the main stumbling blocks in developing practical Li metal batteries is the lack of cathodes with high-mass-loading capable of delivering highly reversible redox reactions. To overcome this issue, here we report an electrode structure that incorporates a UV-cured non-aqueous gel electrolyte and a cathode where the LiNi0.8Co0.1Mn0.1O2 active material is contained in an electron-conductive matrix produced via simultaneous electrospinning and electrospraying. This peculiar structure prevents the solvent-drying-triggered non-uniform distribution of electrode components and shortens the time for cell aging while improving the overall redox homogeneity. Moreover, the electron-conductive matrix eliminates the use of the metal current collector. When a cathode with a mass loading of 60 mg cm-2 is coupled with a 100 µm thick Li metal electrode using additional non-aqueous fluorinated electrolyte solution in lab-scale pouch cell configuration, a specific energy and energy density of 321 Wh kg-1 and 772 Wh L-1 (based on the total mass of the cell), respectively, can be delivered in the initial cycle at 0.1 C (i.e., 1.2 mA cm-2) and 25 °C.

Crystalline Porphyrazine-Linked Fused Aromatic Networks with High Proton Conductivity.

Fused aromatic networks (FANs) have been studied in efforts to overcome the low physicochemical stability of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), while preserving crystallinity. Herein, we describe the synthesis of a highly stable and crystalline FAN (denoted as Pz-FAN) using pyrazine-based building blocks to form porphyrazine (Pz) linkages via an irreversible reaction. Unlike most COFs and FANs, which are synthesized from two different building blocks, the new Pz-FAN is formed using a single building block by self-cyclotetramerization. Controlled and optimized reaction conditions result in a highly crystalline Pz-FAN with physicochemical stability. The newly prepared Pz-FAN displayed a high magnitude (1.16×10-2  S cm-1 ) of proton conductivity compared to other reported FANs and polymers. Finally, the Pz-FAN-based membrane was evaluated for a proton-exchange membrane fuel cell (PEMFC), which showed maximum power and current densities of 192 mW cm-2 and 481 mA cm-2 , respectively.

Guanine-Based G-Quadruplexes Templated by Various Cations toward Potential Use as Single-Ion Conductors.

Inspired by the atomic-sized, shape-regulated features of G-quadruplexes comprising guanine motifs with a monovalent metal cation, the G-quadruplex-forming ability, and properties of a guanine-based π-conjugated Y2 molecule containing bithiophene and peripheral dodecyl chain units in the presence of various cation salts (Li+ , Na+ , K+ , and Mg2+ ) were exploited. A series of structural characterization revealed that Y2 yielded desirable G-quadruplexes with all the tested cations as a consequence of the combination of a hydrogen-bonded cyclic G-quartet, π-stacking, and cation-dipole interactions. The radius and nature of the coordinating cations crucially affected the structural characteristics of G-quadruplexes, leading to variations in the ion migration ability inside the cavity of the G-quadruplex (Li+ >Na+ >K+ >Mg2+ ), as characterized through theoretical and experimental investigations. These results not only improve the understanding of G-quadruplex self-assemblies based on guanine but also provide an impetus for their diverse potential applications, especially in the field of Li batteries.

Flexible, Electrically Conductive, Nanostructured, Asymmetric Aerogel Films for Lithium-Sulfur Batteries.

Lithium-sulfur batteries are afflicted with capacity fading on account of polysulfide shuttling. A novel cost-effective electrode that can hinder the polysulfide shuttling and realize high active material utilization is highly required. Here, we demonstrate a flexible, electrically conductive, nanostructured, and asymmetric hybrid cathode by integrating a high-aspect-ratio wood nanocellulose and a low-cost commercial carbon nanotube (∼$ 0.2 g-1) into an entangled aerogel film. The vacuum filtration combined with lyophilization enables the aerogel film with quite different nanofiber/nanotube packing densities and pore structures at its two sides. The cooperative effects of the entangled building blocks and the asymmetric porous structure of the aerogel film stimulate the simultaneous increase of active sulfur loading, enhancing the electrolyte penetration, alleviating dissolution and shuttling of polysulfide ions, and promoting the fast electron transportation. The as-generated cathode exhibited a capacity fading of 0.01% per cycle over 1000 discharge/charge cycles at a 0.5 C rate (1 C = 1675 mA g-1). The average Coulombic efficiency reached ∼99.7%.

A new high-voltage calcium intercalation host for ultra-stable and high-power calcium rechargeable batteries.

Rechargeable calcium batteries have attracted increasing attention as promising multivalent ion battery systems due to the high abundance of calcium. However, the development has been hampered by the lack of suitable cathodes to accommodate the large and divalent Ca2+ ions at a high redox potential with sufficiently fast ionic conduction. Herein, we report a new intercalation host which presents 500 cycles with a capacity retention of 90% and a remarkable power capability at ~3.2 V (vs. Ca/Ca2+) in a calcium battery. The cathode material derived from Na0.5VPO4.8F0.7 is demonstrated to reversibly accommodate a large amount of Ca2+ ions, forming a series of CaxNa0.5VPO4.8F0.7 (0 < x < 0.5) phases without any noticeable structural degradation. The robust framework enables one of the smallest volume changes (1.4%) and the lowest diffusion barriers for Ca2+ among the cathodes reported to date, offering the basis for the outstanding cycle life and power capability.

Microscopic Analysis of Bacterial Inoculum Effect Using Micropatterned Biochip.

Antimicrobial resistance has become a major problem in public health and clinical environments. Against this background, antibiotic susceptibility testing (AST) has become necessary to cure diseases in an appropriate and timely manner as it indicates the necessary concentration of antibiotics. Recently, microfluidic based rapid AST methods using microscopic analysis have been shown to reduce the time needed for the determination of the proper antibiotics. However, owing to the inoculum effect, the accurate measurement of the minimal inhibitory concentration (MIC) is difficult. We tested four standard bacteria: Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Enterococcus faecalis, against five different antibiotics: piperacillin, cefotaxime, amikacin, levofloxacin, and ampicillin. The results showed that overall, the microfluidic system has a similar inoculum effect compared to the conventional AST method. However, due to the different testing conditions and determination protocols of the growth of the microfluidic based rapid AST, a few results are not identical to the conventional methods using optical density. This result suggests that microfluidic based rapid AST methods require further research on the inoculum effect for practical use in hospitals and can then be used for effective antibiotic prescriptions.

Why Cellulose-Based Electrochemical Energy Storage Devices?

Recent findings demonstrate that cellulose, a highly abundant, versatile, sustainable, and inexpensive material, can be used in the preparation of very stable and flexible electrochemical energy storage devices with high energy and power densities by using electrodes with high mass loadings, composed of conducting composites with high surface areas and thin layers of electroactive material, as well as cellulose-based current collectors and functional separators. Close attention should, however, be paid to the properties of the cellulose (e.g., porosity, pore distribution, pore-size distribution, and crystallinity). The manufacturing of cellulose-based electrodes and all-cellulose devices is also well-suited for large-scale production since it can be made using straightforward filtration-based techniques or paper-making approaches, as well as utilizing various printing techniques. Herein, the recent development and possibilities associated with the use of cellulose are discussed, regarding the manufacturing of electrochemical energy storage devices comprising electrodes with high energy and power densities and lightweight current collectors and functional separators.